Hello, all
I found a message in the archives which attached baseline roof and wall construction materials for all climate zone.The address is : [Equest-users] Materials for baseline design
I really want this file but i cannot download from the archives.If anyone has this inp file, could you send to me?Thanks very much!
Best Regards,SZ
| ? |
| ? | ? | ? | ? | ? |
| [Equest-users] Materials for baseline design[Equest-users] Materials for baseline design Nick Caton ncaton at smithboucher.com Tue Sep 20 09:08:52 PDT 2011 Previous message: [Equest-users] Materials for baseline design |
| |
| ? lists.onebuilding.org ??? | ??? Yahoo |
| |
| ? |
?
Hi Zane,? you?ll get the attached information. I believe this is what you?re looking for, keep in mind it is specific to climate zone 4A, be sure to cross reference the values/layers with 90.1 for your climate zone.
If you go to the link in the thread http://www.rmi.org/rmi/ModelingTools and scroll down to ?additional resources? and click ?Sample DOE-2 input file snippets for ASHRAE Baseline Components
Thanks,
Matthew J. Baron, PE
[wendel EM]
Wendel, 140 John James Audubon Pkwy, Suite 201, Buffalo, NY 14228
p 716.688.0766 f 716.625.6825 e mbaron at wendelcompanies. com w wendelcompanies. com
ARCHITECTURE ENGINEERING PLANNING ENERGY SERVICES CONSTRUCTION MANAGEMENT
CONFIDENTIALITY NOTICE: This email transmission is confidential and is intended only for the person(s) named above. Its contents may also be protected by privilege, and all rights to privilege are expressly claimed and not waived. If you have received this email in error, please call us immediately and destroy the entire email. If this email is not intended for you, any reading, distribution, copying or disclosure of this email is strictly prohibited.
Please consider the environment before printing this email.
Zane,
Funny, I was actually looking into this at the same moment.
Actually, it's not very straightforward, but I've found that you can still
download attachments while browsing the archives. I must admit this was
only very recently after quite a few times pestering about the fact that it
seemed you could not do this...
Check out this thread, in addition to the link Matthew just send you, Adam
Boyd creating constructions for all zones based on ASHRAE 2007.
http://lists.onebuilding.org/htdig.cgi/equest-users-onebuilding.org/2010-April/019551.html
If you scroll all to the bottom, you see
A non-text attachment was scrubbed...
Name: Ashrae Baseline Constructions Import File.inp
Type: application/octet-stream
Size: 3730 bytes
Desc: Ashrae Baseline Constructions Import File.inp
URL:
Click on the URL, and you'll see it. Save as "Ashrae Baseline
Constructions Import File.inp" and you're done.
Cheers,
Julien
--
Julien Marrec, EBCP, BPI MFBA
Energy&Sustainability Engineer
T: +33 6 95 14 42 13
LinkedIn (en) : www.linkedin.com/in/julienmarrec
LinkedIn (fr) : www.linkedin.com/in/julienmarrec/fr
2015-02-10 12:29 GMT+01:00 Matthew J. Baron:
Thanks very much for your information, Julien and Matthew.
It really helps me a lot.
Julien Marrec ? 2015?2?10?, ???, ?? 8:14 ???
Zane,
Funny, I was actually looking into this at the same moment.
Actually, it's not very straightforward, but I've found that you can still download attachments while browsing the archives. I must admit this was only very recently after quite a few times pestering about the fact that it seemed you could not do this...
Check out this thread, in addition to the link Matthew just send you, Adam Boyd creating constructions for all zones based on ASHRAE 2007.
http://lists.onebuilding.org/htdig.cgi/equest-users-onebuilding.org/2010-April/019551.html
If you scroll all to the bottom, you see
A non-text attachment was scrubbed...
Name: Ashrae Baseline Constructions Import File.inp
Type: application/octet-stream
Size: 3730 bytes
Desc: Ashrae Baseline Constructions Import File.inp
URL:
Click on the URL, and you'll see it. Save as "Ashrae Baseline Constructions Import File.inp" and you're done.
Cheers,
Julien
--
Julien Marrec, EBCP, BPI MFBA
Energy&Sustainability Engineer
T: +33 6 95 14 42 13
LinkedIn (en) : www.linkedin.com/in/julienmarrec
LinkedIn (fr) : www.linkedin.com/in/julienmarrec/fr
2015-02-10 12:29 GMT+01:00 Matthew J. Baron:
Hi Zane,If you go to the link in the threadhttp://www.rmi.org/rmi/ModelingTools and scroll down to ?additional resources? and click ?Sample DOE-2 input file snippets for ASHRAE Baseline Components? you?ll get the attached information. I believe this is what you?re looking for, keep in mind it is specific to climate zone 4A, be sure to cross reference the values/layers with 90.1 for your climate zone.?Thanks,Matthew J. Baron, PE
Wendel, 140 John James Audubon Pkwy, Suite 201, Buffalo, NY 14228
p 716.688.0766??f 716.625.6825??e mbaron at wendelcompanies.com??wwendelcompanies.com
ARCHITECTURE??? ENGINEERING??? PLANNING? ??ENERGY SERVICES??? CONSTRUCTION MANAGEMENT
CONFIDENTIALITY NOTICE: This email transmission is confidential and is intended only for the person(s) named above. Its contents may also be protected by privilege, and all rights to privilege are expressly claimed and not waived.? If you have received this email in error, please call us immediately and destroy the entire email. If this email is not intended for you, any reading, distribution, copying or disclosure of this email is strictly prohibited.
Please consider the environment before printing this email.?