Dear friends,
I need to model extraction systems for toilets/kitchens which are not
air-conditioned.
The building is located in Mauritius, where heating is not provided and
where cooling is not performed for toilets/kitchens.
So these spaces would be unconditioned but with air extraction systems. Any
advice how this can be specified in eQuest.
Thanks,
Kishan
You might try giving the spaces a very large acceptable temperature range so the heating and cooling doesn't turn on. Then set a zone level exhaust.
Fred Betz PhD., LEED AP
as Fred Betz refered to, if so ,then it wii consume more energy which should not have been consumed in this case,isn't it?
You might try giving the spaces a very large acceptable temperature range so the heating and cooling doesn?t turn on. Then set a zone level exhaust.
Fred Betz PhD., LEED AP
From: Mahendra Gooroochurn [mailto:m.gooroochurn at gmail.com]
Sent: Saturday, February 26, 2011 11:19 PM
To:equest-users at lists.onebuilding.org
Subject: [Equest-users] Extraction system for kitchen and toilet
Dear friends,
I need to model extraction systems for toilets/kitchens which are not air-conditioned.
The building is located in Mauritius, where heating is not provided and where cooling is not performed for toilets/kitchens.
So these spaces would be unconditioned but with air extraction systems. Any advice how this can be specified in eQuest.
Thanks,
Kishan