I get zero unmet hours when I run the model in eQUEST 3.65-7174 in DOE-2.3 mode.
The sizing methodology is very different in DOE-2.3. The heat pump models were also updated.
The compliance ruleset for the model could not be found and so was not used. Not sure if that matters.
I think there might be something in the compliance ruleset or elsewhere that is giving very high heating loads, as the system sizes in the DOE-2.3 model are all roughly 3.5 cfm/ft2.
Regards,
~Bill
William Bishop, PE, BEMP, BEAP, CEM, LEED AP | Pathfinder Engineers & Architects LLP
Senior Energy Engineer
[cid:image003.jpg at 01D3A583.40271BC0] [cid:image005.jpg at 01D3A583.40271BC0]
134 South Fitzhugh Street Rochester, NY 14608
T: (585) 698-1956 F: (585) 325-6005
bbishop at pathfinder-ea.com
[http://png-5.findicons.com/files/icons/977/rrze/720/globe.png]Carbon Fee and Dividend - simple, effective, and market-based.
