hopefully this is a "simple" question. i have a model created w/the
ddwizard that i've saved to a new file to edit in detailed mode,
specifically for adding electrical submeters.

when saving the file & switching to detailed mode w/the default
electrical meter EM1 the simulation seesm to report energy use as expected.

when i add a building meter, and assign submeters for each tenant space,
everything seems to work fine in terms of reporting electrical usage for
the energy uses such as lighting, task lighting, pumps, fans, etc . . .
but do not report energy usage for cooling or heating outside of the
month of january.

has anyone seen this before? i have thought it might be scheduling
related, but the ddwizard has cooling/heating assigned to schedules &
this also seems to be present in the detailed mode, and does not explain
why results are reported in the wizard file and the single electrical
meter detailed file, but not once additional submeters are added.
sample info below. i can send the .inp file if someone's interested but
i'm hoping there's just something obvious i'm missing that someone will
have seen.

SAMPLE ELECTRICAL METERS:
"EM1" = ELEC-METER
TYPE = UTILITY
BLDG/SUB-METERS = ( "EM-3", "EM-4" )
..
"EM-3" = ELEC-METER
TYPE = BUILDING
SUB-METERS = ( "EM-3-1", "EM-3-1-PRC", "EM-3-1-LTG", "EM-3-2",
"EM-3-2-PRC", "EM-3-2-LTG", "EM-3-3", "EM-3-3-PRC", "EM-3-3-LTG",
"EM-3-4", "EM-3-4-PRC", "EM-3-4-LTG", "EM-3-5", "EM-3-5-PRC",
"EM-3-5-LTG", "EM-3-6", "EM-3-6-PRC", "EM-3-6-LTG" )
..
"EM-4" = ELEC-METER
TYPE = BUILDING
SUB-METERS = ( "EM-CORE", "EM-4-1", "EM-4-1-PRC", "EM-4-1-LTG",
"EM-4-2", "EM-4-2-PRC", "EM-4-2-LTG", "EM-4-3", "EM-4-3-PRC",
"EM-4-3-LTG", "EM-4-4", "EM-4-4-PRC", "EM-4-4-LTG", "EM-4-5",
"EM-4-5-PRC", "EM-4-5-LTG", "EM-4-6", "EM-4-6-PRC", "EM-4-6-LTG",
"EM-4-7", "EM-4-7-PRC", "EM-4-7-LTG", "EM-4-8", "EM-4-8-PRC",
"EM-4-8-LTG", "EM-CORE-LTG", "EM-CORE-PRC" )
..
"EM-3-1" = ELEC-METER
TYPE = SUB-METER
..
"EM-3-1-PRC" = ELEC-METER
TYPE = SUB-METER
..
"EM-3-1-LTG" = ELEC-METER
TYPE = SUB-METER
..

SAMPLE SYSTEM INPUT:
"EL1 Sys15 (PSZ) (G.NW6)" = SYSTEM
TYPE = PSZ
HEAT-SOURCE = HEAT-PUMP
ZONE-HEAT-SOURCE = NONE
BASEBOARD-SOURCE = NONE
MAX-SUPPLY-T = 90
MIN-SUPPLY-T = 55
ECONO-LIMIT-T = 65
ECONO-LOCKOUT = YES
ECONO-LOW-LIMIT = 45
SUPPLY-FLOW = 1950
OA-CONTROL = OA-TEMP
FAN-SCHEDULE = "S15 Sys15 (PSZ) Fan Sch"
SUPPLY-STATIC = 1.25
SUPPLY-EFF = 0.53
RETURN-EFF = 0.53
NIGHT-CYCLE-CTRL = CYCLE-ON-FIRST
INDOOR-FAN-MODE = CONTINUOUS
COOLING-EIR = 0.196246
COMPRESSOR-TYPE = DUAL-SPEED
HEATING-EIR = 0.251566
LIGHT-ELEC-METER = "EM-3-1-LTG"
TASK-ELEC-METER = "EM-3-1-LTG"
EQUIP-ELEC-METER = "EM-3-1-PRC"
SOURCE-ELEC-METE = "EM-3-1-PRC"
HEAT-ELEC-METER = "EM-3-1"
COOL-ELEC-METER = "EM-3-1"
HTREJ-ELEC-METER = "EM-3-1"
AUX-ELEC-METER = "EM-3-1"
VENT-ELEC-METER = "EM-3-1"
REFG-ELEC-METER = "EM-3-1"
SUPP-ELEC-METER = "EM-3-1"
CONTROL-ZONE = "EL1 NW Perim Zn (G.NW6)