Dear all,

We are pleased to announce the release of our next series of free tutorials on natural ventilation modeling in DesignBuilder. These short tutorials explain how to configure a DesignBuilder EnergyPlus model for scheduled and calculated natural ventilation and mixed-mode systems, then set up simulations and analyse results.
If you have never received DesignBuilder training or were trained using earlier software versions, we strongly recommend that you view these short, high-impact tutorials. The tutorials are freely accessible from our Tutorials webpage here: https://designbuilder.co.uk/training/tutorials.
We are also organising a webinar on the September 28th, where we will discuss key points covered in the tutorials including:

* Developing an early-stage conceptual model into a detailed natural ventilation model
* Detailed wind and buoyancy-pressure driven modeling for natural ventilation
* Assessing summer overheating risk in naturally ventilated buildings
* Importing airflow rates from EnergyPlus simulations to define CFD boundary conditions
* Modeling mixed mode ventilation systems.
Join us live on the September 28th, where our experts will also be available to answer your questions on natural ventilation modeling in DesignBuilder. You can register to either attend the live webinar or to receive a recording of the webinar here.
Register here - https://attendee.gotowebinar.com/register/8368346041237846542?source=Bldg-Sim1

With best wishes,
Renjith Jayapalan Nair
Technical Engineer,
DesignBuilder Software Ltd.