To: equest-users-request at lists.onebuilding.org,
equest-users at lists.onebuilding.org
Date: Fri, 26 Aug 2011 09:55:13 +0530
Subject: [Equest-users] cooling unmet hour
Dear Kirti,
Yes, Pasha has give you the points to look at.
In addition to what has been mentioned, it can also happens in
intermittently occupied spaces at the beginning of the cooling/heating
schedule in certain zones.
So need to pay attention to all individual thermal zones
Anura
---------- Forwarded message ----------
*To:* equest-users at lists.onebuilding.org
*Subject:* [Equest-users] Low Cooling Loads, Big Cooling Electric
Consumption
Hi Fredrico,
Also please check the fan/pump supply heads and efficiency values
Anura
**
**
*
*
*From:* steinvor at msu.edu [mailto:steinvor at msu.edu]
*Sent:* Thursday, August 25, 2011 12:09 AM
*To:* equest-users at lists.onebuilding.org
*Subject:* [Equest-users] Low Cooling Loads, Big Cooling Electric
Consumption
Hello All:
In a recent project, my model doesn't have a designed HVAC system, so I'm
modeling my proposed the same as the baseline. Baseline system is #8
(chilled water) with FPF's, climate zone 1. Even though I'm getting lower
cooling loads for the proposed building, the electric load corresponding to
cooling the building is higher than the baseline. Fans and pumps consumption
is increasing this value. What can be causing this, how can this value be
reduced?
Thanks!
Federico
2011/8/27 anura perera