Howdy Y'all!
I found it today and it seems like that it works for an instance!
Copy/Paste in eQUEST Spreadsheet Mode (
http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/2011-September/010170.html
)
It's abpout using Ctrl+Alt+V to copy the data from Exel to the eQuest
spreedsheet.
I found this error though!
It changed all the values at the spreadsheet; I saved it; Run the
simulation. It all showed okay.
I reopened the model again and all the numbers were changed back to its
original numbers!!
Therefore, does this method really work?
Or is it a typical eQuest-drama?
Please help.
Best regards,
Aru
Once you paste the values into eQUEST, you have to copy the values again
and use the Ctrl-V command to paste. If you don't re-copy and paste the
information, eQUEST reads it as text and does not save the changes.
Also, the cells you're trying to paste into need to have a value (red). If
there's no value entered (blank, green, or blue text) it won't take.