I could be wrong on this one because I haven't seen this error in awhile, but try specifying a SPACE.
SPACE
Provides information associated with a space. U-name must be used to identify the space so that it can be referenced in SYSTEMS input. LIKE may be used to copy data from a previously U-named SPACE instruction. LIKE only copies the SPACE instruction and does not carry with it walls, roof, or floors.
Example input:
An 8-ft high space with a floor area of 800 ft2 is located 15 ft east along the south wall of a building aligned in a N-S direction. The overhead lighting is fluorescent (2W/ft2) with some task lighting (300W). There is a 1-hp motor (1 hp = 0.745 kW) in the space running at 80 percent efficiency (thus 20 percent of its energy consumption shows up as heat added to the space). Infiltration is 2 air changes per hour, and six people occupy the space. The space is conditioned.
It is the 'Activity Desc.' For the space in spreadsheet view.
Nimh:
I have never seen this type of error message before. Can you share your .INP and .PD2 so we may see your input to assist you?
John R. Aulbach
I could be wrong on this one because I haven't seen this error in awhile, but try specifying a SPACE.
SPACE
Provides information associated with a space. U-name must be used to identify the space so that it can be referenced in SYSTEMS input. LIKE may be used to copy data from a previously U-named SPACE instruction. LIKE only copies the SPACE instruction and does not carry with it walls, roof, or floors.
Example input:
An 8-ft high space with a floor area of 800 ft2 is located 15 ft east along the south wall of a building aligned in a N-S direction. The overhead lighting is fluorescent (2W/ft2) with some task lighting (300W). There is a 1-hp motor (1 hp = 0.745 kW) in the space running at 80 percent efficiency (thus 20 percent of its energy consumption shows up as heat added to the space). Infiltration is 2 air changes per hour, and six people occupy the space. The space is conditioned.
It is the 'Activity Desc.' For the space in spreadsheet view.
Thanks,
David Griffin
Hi All,
Can anybody tell me where I can find the Building HVAC load in the Equest report?
Thanks.
Nasir, Mohammad
How can I get out of this group?
You can unsubscribe from these mailing lists at the same page you subscribed, at onebuilding.org.
~Nick
[cid:489575314 at 22072009-0ABB]
NICK CATON, P.E.