Hello all,
I've received this error message several times and can't figure out
which input needs to be revised - any help would be great.
**WARNING***************************************************************
*******
In AHU-0-27_ConsSprayRmMUA (MASTER), the return humidity
for a coil exit T of 47.4 is 0.0065
Your setpoint is 0.0005, which may not be held.
***ERROR****************************************************************
*******
In AHU-0-27_ConsSprayRmMUA (MASTER), cooling coil leaving
temperature must
be at least 6F higher than entering water temp.
____________________________________
Lauren Rosenthal