Hi,
Does anybody knows how to retrieve lost 3D Geometry Model. I was in Detail
Interface and editing the overhang. I guessed I click too fast on the window
and then . the 3-D Geometry zoomed out(?) or disappeared!?!? I still have
2-D but not the 3-D.
Any help or input is appreciated. Thanks.
Pandora Lei, EIT
Right-click in the black area and choose "Reset Camera". If that
doesn't work try closing and re-opening.
KATIE L. M. TUTTLE EI, LEED(r) AP
If "Reset Camera" AND closing/re-opening doesn't work...close
eQuest...open your .PD2 file in Notepad and look at lines 13
(ClippingRange), 14 (FocalPoint) and 15 (Position)...
Proj "Peck_Baseline"
ProgramVersion = "eQUEST 3.63.6510"
BDBaseVersion = 24
ProductCode = "eQUEST"
WeatherFile = "TMY2\CHICAGIL.bin"
CreateDate = 1255555885
ModDate = 1262904952
RunDate = 1262903881
LibraryFile = "eQ_Lib.dat"
ActiveMode = 0
InputModule = 1
UseCameraData = 1
ClippingRange = ( 400.541, 1731.6 )
FocalPoint = ( -89.875, 25.375, 18.0293 )
Position = ( -807.176, 648.915, 295.315 )
If any of the values in there are HUGE (probably with exponents) then
just change them to zero...save...re-open eQuest. These values are just
used by the eQuest camera so you're not changing any shell positions or
anything.