?Dear colleagues?,
Hope you are all doing fine !
Briefly, I have simulated a building (two zones) in TRNSYS 17 and SketchUp
then I've made a few changes to my 3D model in SketchUp, so I exported a
new idf file !
*My problem is* : I couldn't find a way to import the new idf file in
Simulation Studio without changing my early project that I am working on,
otherwise I added a shading group to my model and I want to simulate its
effect on the simulation !
I will appreciate any kind of help ! Thank you
Best regards,
ISSMAIL.
Dear Issmail,
I attached a pdf file describing the work flow on creating, importing, exporting and reimporting a TRNSYS 3D building project. I hope this will answer your questions.
Do not hesitate to contact me if you have further questions.
Best regards
Jakob Merk
_________________________________________________________________________________________________
Jakob Merk
TRNSYS Software Team
Transsolar Energietechnik GmbH
Curiestra?e 2
70563 Stuttgart
Fax: +49 711 67976-11
Email: hotline at transsolar.com
Web: www.trnsys.de
Von: TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] Im Auftrag von Issmail Ouhallou
Gesendet: Montag, 28. M?rz 2016 19:16
An: trnsys-users at lists.onebuilding.org
Betreff: [TRNSYS-users] Changing idf File in Project !
?Dear colleagues?,
Hope you are all doing fine !
Briefly, I have simulated a building (two zones) in TRNSYS 17 and SketchUp then I've made a few changes to my 3D model in SketchUp, so I exported a new idf file !
My problem is : I couldn't find a way to import the new idf file in Simulation Studio without changing my early project that I am working on, otherwise I added a shading group to my model and I want to simulate its effect on the simulation !
I will appreciate any kind of help ! Thank you
Best regards,
ISSMAIL.
[Das Bild wurde vom Absender entfernt.]