Greetings All,
I am a bit confused as to how the numbers of the supply air peak flow
and sqft/ton numbers are being generated in the SS-J report.
When I specify a 1CFM/sqft minimum air flow in eQUEST my SS-J report
reads a number of 0.58 CFM/sqft.
Secondly, I size the cooling of the building to 400sqft/ton. Once again,
the SS-J report reads a number close to 1000sqft/ton.
Any insight into this matter would be greatly appreciated.
Regards,
Imran Ebrahim, LEED(r) AP