Hi,

Working on a LEED energy model in Trace. I typically use HAP, which allows
the input of a window frame type, and it then calculates the entire window
assembly U-value and SC, rather than just the glass.

I've had LEED reviewers come back and ask me for my window assembly
calcsand I was able to show how HAP was doing that
calc based on the frame type as well. However, I can't find anything
similar in Trace, and I'm getting nervous about how to show assembly
calculations to a LEED reviewer. I've had terrible luck in the past getting
assembly values from the manufacturer as well.

I spoke with CDS and they recommended modeling a small sliver of wall that
is representative of the frame, which seems quite tedious.

Has anyone either experienced this issue, and figured out a work around?

Thanks!

*Ben Hollon, *

--

------------------------------
Antella Consulting Engineers, inc.

1600 Genessee, Suite 260 * Kansas City, MO 64102 * Tele: (816) 421-0950 * Fax:
(816) 249-2439 * www.antella-inc.com

DISCLAIMER: The information contained in this electronic communication, as
well as in any attachments, is privileged and confidential and intended
solely for use by the addressee(s). Any other use, dissemination, or
copying of this electronic communication is strictly prohibited and is an
interference with Antella Consulting Engineers, inc. confidential business
relationships. If you received this communication in error, please notify
me immediately and permanently delete the original and any electronic or
printed copies of this electronic communication.

------------------------------