Dear All,

Our project building is located in Istanbul/Turkey. Cooling will be
provided by centralised two chillers. There is not a cooling tower. The
project building location is very close the sea and this chillers will
be fed by the sea-water condenser system.
There is a titanium plate type heat exchanger between sea-water and
chiller condenser water. Sea water condenser flow and return
temperatures 22C(71.6F) and 27C(80.6F).
Chiller condenser water flow and return temperatures 29C(84.2F) and
23C(73.4F). In addition, condenser total water flow rate is 340 kg/hr at
250 kPa.
How can sea-water condenser system be modeled in eQuest?

Thank you,
Best Regards.

Sefa Sahin, LEED AP BD+C