Good afternoon energy modelers!
Join us *Tuesday, September 18* for the next meeting of the *Rocky Mountain
Energy Simulation Engineers *(*RMESE*). Members of the NREL commercial
building analysis tools team will be on hand to provide a sneak preview of
the upcoming 0.9 release of OpenStudio including new tools to edit
constructions, chilled and service water systems, and more. You'll also
get a better idea of what DOE is trying to accomplish with this free,
analysis software development kit, and where we're heading in the next few
months.
We will be meeting at *The Tavern Downtown* in downtown Denver *at 6:00 pm
on Tuesday, September 18* for a short presentation and drinks. The Tavern
Downtown is located at 1949 Market St, Denver, CO 80202.
There will be a $10 fee associated with your attendance to cover the cost
of the venue. You will receive one drink ticket and appetizers with your
attendance fee. *Please RSVP to Jessie Jones at jjones at rmhgroup.com* or
(303)312-4641 so that we can reserve enough space to accommodate everyone.
This is not invite only- so pass the word on to coworkers, colleagues, and
other industry professionals who may be interested.
Thank you,
*RMESE Steering Committee*
Peter,
Could you SKYPE this or use GO TO MEETING?
Jeff S. Haberl, Ph.D.,P.E., FASHRAE
Hi Jeff, we haven't done this before, so I'll have to investigate and get
back to you. I'll check with the rest of the committee and the presenters.
P
I'll Second that.
Thanks,
Kevin
Me too!
Joe Huang
I hope The Tavern Downtown has a lot of bandwidth!
? and I?d also be interested.
p.s., Will you address how OpenStudio works alongside or competes with Simergy?
James V Dirkes II, PE, BEMP, LEED AP
New York is beginning to use a free service called *AnyMeeting*.
http://www.anymeeting.com/
It supports 200 attendees free of charges.
The Boston chapter has been using it successfully.
*Arpan Bakshi** *LEED AP BD+C, ESTIDAMA PQP
Thanks to everyone who has expressed interest and/or offered to help us
stream the meeting. We're still deciding what we will do. However, I've
learned that NREL will be offering a two-day OpenStudio workshop on October
22-23. The planners are aware that there is interest in streaming or
recording that workshop. That might be a better option for everyone rather
than attempting to stream from a sports bar!
P
I think it would be extremely useful to have the OpenStudio workshop in
October available as a webinar on the days of the actual workshop as well as
a recording that could be viewed later.
Robin Mitchell
Hi Jeff, we haven't done this before, so I'll have to investigate and get
back to you. I'll check with the rest of the committee and the presenters.
P
I'll Second that.
Thanks,
Kevin
Me too!
Joe Huang
Peter,
Agree with Jeff, it would be great. Or at least to share presentation and
notes.
Jos?
De: Peter Ellis [mailto:peter.ellis at bigladdersoftware.com]
Enviado el: domingo, 26 de agosto de 2012 11:12 p.m.
Para: Jeff Haberl
CC: bldg-sim at onebuilding.org; ibpsausa at onebuilding.org;
equest-users at onebuilding.org
Asunto: Re: [Equest-users] [Ibpsausa] Rocky Mountain Energy Simulation
Engineers Meeting - September 18
Hi Jeff, we haven't done this before, so I'll have to investigate and get
back to you. I'll check with the rest of the committee and the presenters.
P
New York is beginning to use a free service called *AnyMeeting*.
http://www.anymeeting.com/
It supports 200 attendees free of charges.
The Boston chapter has been using it successfully.
*Arpan Bakshi** *LEED AP BD+C, ESTIDAMA PQP
Thanks to everyone who has expressed interest and/or offered to help us
stream the meeting. We're still deciding what we will do. However, I've
learned that NREL will be offering a two-day OpenStudio workshop on October
22-23. The planners are aware that there is interest in streaming or
recording that workshop. That might be a better option for everyone rather
than attempting to stream from a sports bar!
P