Hi Ahmad,
I applied the PSZ-HP that you created in your model as the ?Kitchen TRU? to
all designated zones and clicked on the ?Conditioned?. The model runs
without any error or problem. The inp and pd2 files are attached.
Morteza,
Morteza Kasmaei
Senior Architect
LEED AP BD+C, GGP
On Wed, Sep 29, 2021 at 4:55 PM
wrote:
Thank you Morteza for your help. wrote:
Regards
Ahmad
On Friday, October 1, 2021, 06:01:41 AM GMT+10, Morteza Kasmai via Equest-users
Hi Ahmad,
I applied the PSZ-HP that you created in your model as the?Kitchen TRU? to all designated zones and clicked on the ?Conditioned?. Themodel runs without any error or problem. The inp and pd2 files are attached.?
Morteza,
Morteza Kasmaei
Senior Architect
LEED AP BD+C, GGP?
Send Equest-users mailing list submissions to
? ? ? ? equest-users at lists.onebuilding.org
To subscribe or unsubscribe via the World Wide Web, visit
? ? ? ? http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
or, via email, send a message with subject or body 'help' to
? ? ? ? equest-users-request at lists.onebuilding.org
You can reach the person managing the list at
? ? ? ? equest-users-owner at lists.onebuilding.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Equest-users digest..."
Today's Topics:
? ?1. eQUEST stop when in the middle of the simulation (Ahmad Fraij)
? ?2. Re: eQUEST stop when in the middle of the simulation
? ? ? (John Aulbach)
? ?3. Re: eQUEST stop when in the middle of the simulation (Ahmad Fraij)
---------- Forwarded message ----------
From:?Ahmad Fraij
To:?Fraij via Equest-users
Cc:?
Bcc:?
Date:?Wed, 29 Sep 2021 04:12:36 +0000 (UTC)
Subject:?[Equest-users] eQUEST stop when in the middle of the simulation
Hello Guys,
I have encountered a problem in which when I assign a roof top heat pump unit for a zone and run a simulation, eQUEST start the simulation and then stop in the middle and close and I have to open it again. However, when I delete the roof top unit and assign for the same zone chiller/boiler system that is used for the other zones in the same building, it works and complete the simulation.
Does anybody can advise what is the problem and how to solve it?
Thank you
Ahmad
---------- Forwarded message ----------, Ahmad Fraij via Equest-users
From:?John Aulbach
To:?Ahmad Fraij
Cc:?
Bcc:?
Date:?Wed, 29 Sep 2021 04:46:51 +0000 (UTC)
Subject:?Re: [Equest-users] eQUEST stop when in the middle of the simulation
Can you make your .input and .pd2 available for all to look?John R Aulbach, PE
Sent from Yahoo Mail on Android
On Tue, Sep 28, 2021 at 9:12 PM, Ahmad Fraij via Equest-users wrote: Hello Guys,
I have encountered a problem in which when I assign a roof top heat pump unit for a zone and run a simulation, eQUEST start the simulation and then stop in the middle and close and I have to open it again. However, when I delete the roof top unit and assign for the same zone chiller/boiler system that is used for the other zones in the same building, it works and complete the simulation.
Does anybody can advise what is the problem and how to solve it?
Thank you
Ahmad_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send? a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
---------- Forwarded message ----------, John Aulbach wrote:
From:?Ahmad Fraij
To:?Ahmad Fraij via Equest-users
Cc:?
Bcc:?
Date:?Wed, 29 Sep 2021 05:02:14 +0000 (UTC)
Subject:?Re: [Equest-users] eQUEST stop when in the middle of the simulation
Thanks John,
Yes, please find attached the .pd2 and .inp files
Thanks in advance for the help.
Regards
Ahmad
On Wednesday, September 29, 2021, 02:46:59 PM GMT+10, John Aulbach
Can you make your .input and .pd2 available for all to look?John R Aulbach, PE
Sent from Yahoo Mail on Android
On Tue, Sep 28, 2021 at 9:12 PM, Ahmad Fraij via Equest-users wrote: Hello Guys,
I have encountered a problem in which when I assign a roof top heat pump unit for a zone and run a simulation, eQUEST start the simulation and then stop in the middle and close and I have to open it again. However, when I delete the roof top unit and assign for the same zone chiller/boiler system that is used for the other zones in the same building, it works and complete the simulation.
Does anybody can advise what is the problem and how to solve it?
Thank you
Ahmad_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send? a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
_______________________________________________
Equest-users mailing list
Equest-users at lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send? a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG