The Compliance Analysis Manual documents the commands for generating compliance analysis interfaces but it would appear that only a subset of those commands are available for use directly in eQuest. For example, many people have pointed out that you can access the C-ACTIVITY-DESC keyword to programmatically set various keywords in the spaces (schedules, lighting and equipment loads, etc.).

Does anyone know what subset of these compliance analysis commands are available for use directly in eQuest?

[cid:image003.png at 01D09C46.E75BA0D0]
Christopher Jones, P.Eng.
Senior Engineer

WSP Canada Inc.
2300 Yonge Street, Suite 2300
Toronto, ON M4P 1E4
T +1 416-644-4226
F +1 416-487-9766
C +1 416-697-0065

www.wspgroup.com

________________________________

You are receiving this communication because you are listed as a current WSP contact. Should you have any questions regarding WSP?s electronic communications policy, please consult our Anti-Spam Commitment www.wspgroup.com/casl. For any concern or if you believe you should not be receiving this message, please forward this message to us at caslcompliance at wspgroup.com so that we can promptly address your request. This message is intended only for the use of the individual or entity to which it is addressed, and may contain information which is privileged, confidential, proprietary or exempt from disclosure under applicable law. If you are not the intended recipient or the person responsible for delivering the message to the intended recipient, you are strictly prohibited from disclosing, distributing, copying or in any way using this message. If you have received this communication in error, please notify the sender, and destroy and delete any copies you may have received.

WSP provides professional land surveying services through the following entities: WSP Surveys (AB) Limited Partnership and WSP Surveys (BC) Limited Partnership