Can anyone confirm the presence of errors in the BDLLIB.dat file? I see a number of cases where the emissivity does not appear to match to label, but I haven't read about any bugs or issues therein. Examples include GTC: 2638, 2662, 2664, 2666, 2865.
Some of these have no low-e coating, one has the incorrect emissivity used rather than the one listed in the label, others have the coating on the wrong surface from what is listed.
Here's 2666:
$LIBRARY-ENTRY 2666 GLASS-TYPE-CODE Double Low-E
$Double Low-E (e2=.04) Tint
$6mm/6mm Air
DESCRIPTION=*Dbl Low-E (e2=.04) Tint 6mm/6mm Air *
DRAWING=50019
NLAYER=2 RBSOL-HEMI=0.352 RBVIS-HEMI=0.192 SHDCOF=0.350
GAPS-FILL= (Air ,Air ,Air ,Air )
GAPS-THICK=( 6.3, 0.0, 0.0, 0.0)
GAPS-COND= (0.02410,0.00000,0.00000,0.00000)
GAPS-DCOND=( 7.600, 0.000, 0.000, 0.000)
GAPS-VISC= ( 1.730, 0.000, 0.000, 0.000)
GAPS-DVISC=(10.000, 0.000, 0.000, 0.000)
GAPS-DENS= ( 1.290, 0.000, 0.000, 0.000)
GAPS-DDENS=(-0.0044, 0.0000, 0.0000, 0.0000)
GAPS-PR= ( 0.720, 0.000, 0.000, 0.000)
GAPS-DPR= (0.00180,0.00000,0.00000,0.00000)
TSOL= (0.208,0.209,0.205,0.201,0.194,0.183,0.161,0.118,0.054,0.000,0.171)
TVIS= (0.407,0.409,0.403,0.396,0.385,0.364,0.318,0.230,0.106,0.000,0.338)
ABS-1=(0.606,0.612,0.617,0.618,0.613,0.607,0.598,0.560,0.413,0.001,0.587)
ABS-2=(0.041,0.042,0.042,0.042,0.043,0.044,0.043,0.038,0.027,0.000,0.041)
PANES-ID= ( 550, 3, 0, 0, 0)
PANES-TIR= (0.000,0.000,0.000,0.000,0.000)
PANES-EMIS-F=(0.840,0.840,0.000,0.000,0.000)
PANES-EMIS-B=(0.840,0.840,0.000,0.000,0.000)
PANES-THICK= (6.000,6.000,0.000,0.000,0.000)
PANES-COND= ( 150.0, 150.0, 0.0, 0.0, 0.0)
FILMS-COND= (25.47, 3.23, 7.84) U-CENTER= 2.34 ..