Difference between Electricity consumption figures

4 posts / 0 new
Last post

Hi everyone

I am doing this project (VAV with electric reheat system) which has absorption chiller (connected to 1st Cogen plant exhaust loop and Steam 1 meter) and preheat coils (connected to 2nd Cogen plant exhaust loop and Steam 2 meter). There is no ERV installed on the system and there are 2 Cogen plants each 1 MW power. Cogens are electrically tracked for the case.

Here I saw something interesting at BEPU report which I never came across. The total electricity consumption is 455,541 KWH as per this report but when I added all end uses energy consumption (37796 + 0 + 141858........ + 427), total is 464,529 KWH. The difference is almost 95,000 KWH.

Can someone please explain me what's the reason of difference between Total electricity consumption Versus "number I got after adding all end use electricity consumption". I used to think BEPU report shows exact numbers whatever they are after Cogen plants savings at electricity side. 95,000 KWH is a big number.

Thanks a lot in advance.
[cid:image003.jpg at 01CFE182.0D9413C0]

Harshul Singhal
Project Consultant
Thornton Tomasetti
386 Fore Street, Suite 401
Portland, ME 04101
T +1.207.245.6060 F +1.207.245.6061
D +1.207.245.6074
HSinghal at ThorntonTomasetti.com
www.ThorntonTomasetti.com

<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>

The information in this email and any attachments may contain

confidential information that is intended solely for the

attention and use of the named addressee(s). This message or

any part thereof must not be disclosed, copied, distributed

or retained by any person without authorization from the

addressee. If you are not the intended addressee, please

notify the sender immediately, and delete this message.

<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>

Harshul's picture
Offline
Joined: 2014-03-25
Reputation: 0