Hello everyone,

I recently created a DOE 2.2 model and realized that the client requested
it under DOE 2.3 version. So, I made a save as file and made a few changes
as listed under this post (
https://energy-models.com/forum/fyi-running-equest-doe-23-vs-doe-22) to
open the file with DOE 2.3 successfully without any errors.
However, upon opening with the DOE 2.3 version, now I see 9 blank entries
between each zone under the "Air-Side HVAC" tab. Please find before and
after screenshots below:

Before (DOE 2.2):
[image: image.png]

After (DOE-2.3):
[image: image.png]

Can someone help me eliminate those blank spaces in the DOE 2.3 version?
I did check the .inp file to make sure that it does not contain 9 ..
entries as blank spaces between each zone. The zone arrangement in the inp
file looks exactly the same between both versions. Also, these blank
entries in spreadsheet mode only exist at zone level under the AIr Side
HVAC tab and not under any other tabs for any other lists.

Thank you for your time and effort.

Rahil Shah
Director of Sustainability
Ventrop ECG PLLC
rahil at ventrop.com