Appendix G3.1.1 states that for systems 5, 6, 7, and 8, each floor shall be modeled with a separate HVAC system. When performing the Compliance Analysis eQuest creates a Baseline separate system for each shell even though a floor may be modeled with 2 or more shells. My question is should the Baseline systems be revised so that each floor has only one system - in other words, where a floor is modeled with two or more separate shells, combine the equest created systems into one system for that floor?

Christopher Jones, P.Eng.
Halsall Associates
Tel: 416.644.4226 . Toll Free: 1.888.425.7255 x 527 . ?www.halsall.com
Vancouver . Calgary . Sudbury? . Burlington . Toronto . Ottawa
Best Workplaces in Canada, Seven Consecutive Years: 2007 - 2013
___________________________
A Parsons Brinckerhoff Company

______________________________________________________________________
NOTICE: This communication and any attachments ("this message") may contain confidential information for the sole use of the intended recipient(s). Any unauthorized use, disclosure, viewing, copying, alteration, dissemination or distribution of, or reliance on this message is strictly prohibited. If you have received this message in error, or you are not an authorized recipient, please notify the sender immediately by replying to this message, delete this message and all copies from your e-mail system and destroy any printed copies.