Hello All,
I am working on my first e-Quest model after working 3 years on Trace 700.
I am modeling Water source heat pump with cooling tower. The boilers are not turning on and I do not see any gas consumption.
Can anyone please advice on how to make it work?
Thanks in advance.
Fareed Syed EIT LEED(r) AP
If you attach your inp file, this list-serve could offer you lots of
help. However, based on your current description, I can't tell what
the issue is
Karen
On Monday, February 14, 2011, Syed, Fareed>
Here are Fareed's files. If anyone has a chance to look at them.
Here is his issue: ..there is no boiler capacities. I am not sure if boiler
is running at all. I want the boiler to supply HW to WSHPs when the OA temp
hits 45F.
Thanks,
Fareed
---------- Forwarded message ----------
I have had the same issue on one of my model. However when I ran the hourly reports to look at the temperature of the loop it was always above 75? therefore the boilers was never needed.
Christie Rimes, LEED BD+C
All:
Just looking at the pictorial diagram, the boiler isn't even connected to the
water source heat pump loop. So how can it come on ??
John R. Aulbach, PE, CEM
Whoops - got that wrong !!
These IS boiler capacity in the loop. Let me look further. Sorry for the
previous post !!
John A.