Hi eQUEST users,
I am doing a eQUEST model for LEED Baseline,however, after runing,many warnings are generated in SIM file and have a larger summer heating,I can not find the reason for this.Anyone can help me?Any suggetion is appriciated!Attachment is my inp , pd2 file and weather data.

Below are warings in SIM File

**WARNING**********************************************************************
ZONE E13 West Perim Zn (G.W8)
might have insufficient heating capability.
Check that the SYSTEM or ZONE HEATING-CAPACITY plus this
ZONEs BASEBOARD-RATING is adequate to maintain the ZONE
specified DESIGN-HEAT-T for the calculated peak ZONE load
(see LS-A or LS-B for the ZONE peak load.)
ZONE E13 West Perim Zn (G.W8) has a THERMOSTAT-TYPE
of REVERSE-ACTION, which, when added to the issues listed
in the messages above, will cause excessive underheating.
**WARNING**********************************************************************
ZONE E13 NNW Perim Zn (G.NNW10)
might have insufficient heating capability.
Check that the SYSTEM or ZONE HEATING-CAPACITY plus this
ZONEs BASEBOARD-RATING is adequate to maintain the ZONE
specified DESIGN-HEAT-T for the calculated peak ZONE load
(see LS-A or LS-B for the ZONE peak load.)
ZONE E13 NNW Perim Zn (G.NNW10) has a THERMOSTAT-TYPE
of REVERSE-ACTION, which, when added to the issues listed
in the messages above, will cause excessive underheating.
**WARNING**********************************************************************

...

------------------
???
????????????
???????438?
??:13574805636
Email:zhaoyongqing1987 at 126.com
503271081 at qq.com