Hi everyone,

I am performing energy analysis for a University hall of residence using
solar water heaters to provide the hot water requirements both for DHW and
for an absorption chiller system.
heaters cannot be directly implemented in equest, but the energy saving can
be discounted from the total energy consumption. Is that the correct
approach?

I tried specifying a two-stage absorption chiller as the chiller type in DD
wizard but the simulation is not completed successfully, terminating at
around 18% with 1 error. I would be grateful to receive help related to
modeling the absorption chiller system. Is there any specific parameter(s) I
need to give in the chiller properties dialog which am missing or are the
default values given sufficient to run the simulation.

Thanks,
Kishan