Dear all,

I am simulating model for , chennai and delhi climate for different
glazings . I am new and dont understand the technical terms too much. I
need your help in understanding the results produced by simulation soft.
the results are as follows:

1) Chennai
Alternative Lights Equip. *Cooling* Tower Pumps Fans Ext. Lights Ext.
Equip. Total
__________________________________________________________________ ASHRAE
Base Case0 5,73,699 9,30,276 7,75,048 3,00,063 75,368 2,31,614 6,480
4,93,914 33,86,462 SCL 6mm 5,73,699 9,30,276 8,07,086 3,03,436 75,742
2,51,791 6,480 4,93,914 34,42,424 SGRY 6 mm 5,73,699 9,30,276 7,91,432
3,01,803 75,523 2,42,107 6,480 4,93,914 34,15,234 D Cl 5,73,699 9,30,276
7,96,093 3,02,354 75,544 2,44,919 6,480 4,93,914 34,23,279 DGRY 5,73,699
9,30,276 7,81,177 3,00,780 75,389 2,35,615 6,480 4,93,914 33,97,330 D A SC
5,73,699 9,30,276 7,66,571 2,99,216 75,292 2,26,508 6,480 4,93,914 33,71,956 D
R SC 5,73,699 9,30,276 7,58,191 2,98,322 75,252 2,21,315 6,480 4,93,914
33,57,449 D LE 1 5,73,699 9,30,276 7,82,967 3,00,993 75,395 2,36,762 6,480
4,93,914 34,00,486 D LE 2 5,73,699 9,30,276 7,81,155 3,00,803 75,378
2,35,635 6,480 4,93,914 33,97,340

in this table there is no heating , so that means there is no heating
savings ???
only cooling energy saving??? And heating and cooling energyy depends
upon ???

For delhi ,

Alternative Lights Equip. *Heating* *Cooling* Tower Pumps Fans Ext.
Lights Ext.
Equip. Total
__________________________________________________________________ ASHRAE
Base Case0 5,73,699 9,30,276 1,132 5,95,227 2,78,235 73,483 2,19,444 6,480
4,93,914 31,71,890 SCL 6mm 5,73,699 9,30,276 1,027 6,32,056 2,84,756 74,732
2,42,807 6,480 4,93,914 32,39,747 SGRY 6 mm 5,73,699 9,30,276 1,069
6,14,566 2,81,912 74,188 2,31,467 6,480 4,93,914 32,07,571 D Cl 5,73,699
9,30,276 893 6,25,518 2,84,750 74,845 2,36,128 6,480 4,93,914 32,26,503
DGRY 5,73,699 9,30,276 935 6,09,395 2,82,294 74,441 2,25,553 6,480 4,93,914
31,96,987 D A SC 5,73,699 9,30,276 973 5,93,791 2,79,623 73,992 2,15,568
6,480 4,93,914 31,68,316 D R SC 5,73,699 9,30,276 955 5,86,783 2,78,744
73,918 2,10,414 6,480 4,93,914 31,55,183 D LE 1 5,73,699 9,30,276 868
6,14,276 2,83,530 74,725 2,27,647 6,480 4,93,914 32,05,415 D LE 2 5,73,699
9,30,276 863 6,12,784 2,83,394 74,720 2,26,494 6,480 4,93,914 32,02,624 30
SCL 6mm 5,73,699 9,30,276 1,411 5,92,014 2,75,107 72,553 2,22,131 6,480
4,93,914 31,67,585 40 SCL 6mm 5,73,699 9,30,276 1,172 6,81,033 2,89,710
75,845 2,77,578 6,480 4,93,914 33,29,707

For delhi its showing both heating and coolinf energy consumption

So if i want to show the cooling and heating savings m when glazing is
used then is it the one which shows the same , Or do i need to consider
total energy savings.