Hi,
In page 178 G.3.1.3.10 it is mentioned that chilled water pumps for
system 7 and 8 shall be modeled with baseline design power of 22W/gpm and in
G.3.1.3.11 it tells that for baseline consdenser water pump shall be modeled
with 19W/gpm .

I shall be obliged if anyone can tell how to make these entries because
there is no direct input in software as W/gpm for the primary , secondary
and condenser water pump.Is there any indirect approach .

I look forward for your valuable response.

Thanks
Sambhav Tiwari.