We are trying to model an earth air heat exchanger (EAHX) applied to a
small office building in eQuest. A simplified ventilation system
schematic is below.

-----------------------------------------------------
| ^
V |
Inlet->Fan->AAHX->Diverter->EAHX->Diverter->Heater->Dehum->Office--
| | ^
V V |
Grill ------------------
|
V
Outlet

Q: 745 cfm (continuous air flow) A: 1668 sf (building gross
area)
V: 15012 cf (building gross volume) E: 3/hr (average air changes)

The EAHX has been modeled for a year span with both a spreadsheet and
GAEA. I have searched the bldg-sim listserv and equest-users archives on
modeling EAHXs in eQuest and read the posts I found. One post from Demba
Ndiaye to Neeraj Kapoor (Mon Jun 23 06:17:09 PDT 2008) stated; "I
recently modeled a ground-to-air heat exchanger using GAEA. You can
download a free trial version at WWW: http://nesa1.uni-siegen.de/. You
can import back the results into eQuest."

My question is: How do I import the EAHX simulation results into eQuest?

We have a working knowledge of eQuest and can comfortably run basic
scenarios, but are not experienced users.

Thanks!

Thomas S Blue PE PLS