Disappearing zones in eQuest

2 posts / 0 new
Last post

I am assisting a friend on a single story building (so far). The shell and zoning in the DD Wizard appears to match. Yet, when one switches to the 2D and 3D view, several (not all) zones disappear. A shaded area fills where the zones should be.
What would create this illusion?
John Aulbach

John Aulbach's picture
Offline
Joined: 2011-09-30
Reputation: 1

Hi John,
Have you created one shell for the whole building or multiple shells? If multiple shells then you need to click on each shell in the 2D view to appear.
I hope the above will help.
Regards
Ahmad
On Sunday, 31 March 2024 at 09:03:10 am AEDT, John Aulbach via Equest-users wrote:

I am assisting a friend on a single story building (so far). The shell and zoning in the DD Wizard appears to match. Yet, when one switches to the 2D and 3D view, several (not all) zones disappear. A shaded area fills where the zones should be.
What would create this illusion?
John Aulbach_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send? a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG

Ahmad Fraij's picture
Offline
Joined: 2020-10-13
Reputation: 0