Hello,
I am relatively new to eQuest, and trying to analyze the output from one
of my models. I am having trouble reconciling two of the reports: BEPS
(Building Energy Performance) with LS-E (Space Monthly Load Components).
My model only has 3 spaces, and the total annual heating load for the
three spaces is: 62.240 + 34.887 + 66.305 = 163.432 MBTU.
However, the BEPS report shows a total heating fuel use for Natural Gas
of 113.0 MBTU.
The fuel number should actually be larger than the sum of the heating
load, since there is some loss of energy in the conversion of the fuel
to heat. In this case, there is actually a smaller amount of BTUs in
the fuel for the overall building.
If someone understands how this works, please let me know.
Thanks,
Michael R. Young, P.E.
.INP and .PD2 files are MOST helpful to help YOU, Sir, if you would hsare them.
John Aulbach
Yes - somewhere I THOUGHT I had this list, but have misplaced it.
?
I am attempting to use two files (whos extensions escape me) which have the information?used for the Parametric outputs summarized within the eQuest reports. The costs and energy savings are on two separate files. I need to export this information to input into report spreadsheets.
?
My thanks and Happy New Year.
?
John Aulbach
Here you go, attached.
William Bishop, EIT, LEED(r) AP
My tahnks, Bill. I knew a "genius" out there had this.
John