Hi All,

I simulated on building in equest i am getting nearly 92
hrs for each conditioned zone as unmet hrs can you tell me what could
be the reason and what should i do to solve this problem in the air
side hvac tabe there is option as supply air cfm input shall i leave
it black so the it will be auto size or i shall give the supply cfm
input there.

2 How can i rotate base case in 4 orientations in equest.

3 In the DD wizrd no 15 there is input as interior end use
contributing to space load as following

interior ambient lighting

interior task lighting

office equipment

cooking equipment

miscellaneous equipment

process load

motors

air compressors

sir my question is that apart from ambient lighting and equipment
which other interior end use should i take if my project is a office
and a retail.

4 When applying the heat recovery wheel in parametric run one option
comes there as (recovery-exaust---- yes/no?) does the meaning of
taking it yes is that we are taking the exaust recovery wheel?

Thanks
Sambhav.

Hi,
I modeled on building in visualdoe ans equest just to see the
annual energy comparasion in both tools

What i seen was the same building with same parameters i have given
for u value LPD, EPD,Schedules ,construction, building
orientation,glass type,windo wall ratio ,HVAC system type,cfm/person
,means every thing same from a to z but still a great difference is
coming in annual energy consumption as

Visual doe

294000kwh

Equest

214000kwh

I checked out every thing again but didnt found any mismatch in input
for both tools in input but still this difference is coming can you
suggest some solution

Thanks
Sambhav.

Hi All,
I modeled one 2 floor building in equest taking
packaged multi zone system but in the annual energy consumption it is
showing energy consumption in pump/aux also which is surprising boz
packaged multizone system is not having any water side HVAC only air
size HVAC hence pump energy consumption should be zero. but still it
is showing abt 6500kwh consumption in pump can you suggest the
solution

Also should i leave light off and equipment and miscellaneous and
DHW profiles as it is in the wizard mode or edit there, bcoz in
detailed edit mode i will define my all of these mentioned schedules .

Thanks
Sambhav.

To,

Mr John.

Dear SIr,
I got your point what i did was i created one more
file of the original file .The original file was have the system
packaged multizone and in the copy of that file i changed the system
to VAV with 2 (air+water cooled chiller) and now in the new file i
will apply the other parametric runs like u value of construction and
better glazing and others etc. And then i will compare the proposed
case in my new file which i got by appliying paremetric run with my
earlier file . now earlier file wiil be the base case for me . Is this
the way to go sir.

And sir in base case we have to run the building in 4 orientations is
there some option to do it in equest.

Thanks
Sambhav.