The monthly kW is available in the .sim report file. The PS-B report is for the whole building, the PS-E report shows the peak monthly demand for the different end-uses.
Christopher R. Jones, P.Eng.
Technical Specialist
Sustainability & Energy
[cid:image001.png at 01D314E6.833D1B90]
T +1 416-644-0252
2300 Yonge Street, Suite 2300
Toronto, ON M4P 1E4 Canada
wsp.com
Please consider the environment before printing...
Thanks Christopher, but I was referring to the graphs similar to the summary simulation output.
The only choice I have is to view the Baseline Monthly Energy Consumption by End-Use
In the tutorials they show a list in the Review Simulation Results tab that includes single run reports such as Monthly Energy Consumption and Monthly Peak Demand.
Do you know how to set up eQuest so I can view these additional graphs?
Thank you,
?Paul Diglio
87 Fairmont Avenue
New Haven, CT 06513
Do you mean this? If not, a picture of what you?re looking for would help for clarity ;-).
[cid:image002.png at 01D314F4.87686D60]
[cid:image003.png at 01D314F4.87686D60]
Nick Caton, P.E., BEMP
Senior Energy Engineer
Regional Energy Engineering Manager
Energy and Sustainability Services
Schneider Electric
D 913.564.6361
M 785.410.3317
F 913.564.6380
E nicholas.caton at schneider-electric.com
15200 Santa Fe Trail Drive
Suite 204
Lenexa, KS 66219
United States
Yes, Nick-that's it.
All I get in the left hand report box is one choice, Baseline Design.
Thank you,?Paul Diglio
87 Fairmont Avenue
New Haven, CT 06513
My hunch is you need to click the ?Reports? tab on the bottom left once you?ve entered the ?Simulation Results View? (highlighted below).
The ?Projects\Runs? tab will describe any simulation without a parametric run as ?Baseline Design.?
~Nick
[cid:image001.png at 01D314FA.1BA58C10]
Nick Caton, P.E., BEMP
Senior Energy Engineer
Regional Energy Engineering Manager
Energy and Sustainability Services
Schneider Electric
D 913.564.6361
M 785.410.3317
F 913.564.6380
E nicholas.caton at schneider-electric.com
15200 Santa Fe Trail Drive
Suite 204
Lenexa, KS 66219
United States
The monthly kW is available in the .sim report file. The PS-B report is for the whole building, the PS-E report shows the peak monthly demand for the different end-uses.
Christopher R. Jones, P.Eng.
Technical Specialist
Sustainability & Energy
[cid:image001.png at 01D314E6.833D1B90]
T +1 416-644-0252
2300 Yonge Street, Suite 2300
Toronto, ON M4P 1E4 Canada
wsp.com
Please consider the environment before printing...
Thanks Christopher, but I was referring to the graphs similar to the summary simulation output.
The only choice I have is to view the Baseline Monthly Energy Consumption by End-Use
In the tutorials they show a list in the Review Simulation Results tab that includes single run reports such as Monthly Energy Consumption and Monthly Peak Demand.
Do you know how to set up eQuest so I can view these additional graphs?
Thank you,
?Paul Diglio
87 Fairmont Avenue
New Haven, CT 06513
Do you mean this? If not, a picture of what you?re looking for would help for clarity ;-).
[cid:image002.png at 01D314F4.87686D60]
[cid:image003.png at 01D314F4.87686D60]
Nick Caton, P.E., BEMP
Senior Energy Engineer
Regional Energy Engineering Manager
Energy and Sustainability Services
Schneider Electric
D 913.564.6361
M 785.410.3317
F 913.564.6380
E nicholas.caton at schneider-electric.com
15200 Santa Fe Trail Drive
Suite 204
Lenexa, KS 66219
United States
[cid:image004.png at 01D314F4.87686D60]
Yes, Nick-that's it.
All I get in the left hand report box is one choice, Baseline Design.
Thank you,?Paul Diglio
87 Fairmont Avenue
New Haven, CT 06513
My hunch is you need to click the ?Reports? tab on the bottom left once you?ve entered the ?Simulation Results View? (highlighted below).
The ?Projects\Runs? tab will describe any simulation without a parametric run as ?Baseline Design.?
~Nick
[cid:image001.png at 01D314FA.1BA58C10]
Nick Caton, P.E., BEMP
Senior Energy Engineer
Regional Energy Engineering Manager
Energy and Sustainability Services
Schneider Electric
D 913.564.6361
M 785.410.3317
F 913.564.6380
E nicholas.caton at schneider-electric.com
15200 Santa Fe Trail Drive
Suite 204
Lenexa, KS 66219
United States
[cid:image003.png at 01D314FA.1BA58C10]
That's it!
Thank you so much.
?Paul Diglio
87 Fairmont Avenue
New Haven, CT 06513