Hi All,
Has anyone experienced this before? I am running a simulation and the output reports span 24 months instead of 12. Please see attached SS-G report for an example. In addition, my unmet hours are twice what they should be due to the fact that eQUEST is running the model over a 2-year period. Any idea why this might be happening or suggestions for a fix?
Any insight is appreciated!
Thanks,
Vicki
Vicki Rybl | Energy Engineer
RDK Engineers
Seaport Center
70 Fargo Street, Suite 800
Boston, MA 02210
P: (857) 221-5943 | F: (617) 345-4226
vrybl at rdkengineers.com
Vicki,
Did you create a second RUN-PERIOD under Simulation Options? If so, all the monthly reports will show 24 months of data.
[cid:image002.png at 01D1B01E.228F7730]
As for unmet hours, that?s hard for anyone to diagnose without the model files.
Regards,
~Bill
William Bishop, PE, BEMP, BEAP, CEM, LEED AP | Pathfinder Engineers & Architects LLP
Senior Energy Engineer
[cid:image004.jpg at 01D1B01E.228F7730] [cid:image006.jpg at 01D1B01E.228F7730]
134 South Fitzhugh Street Rochester, NY 14608
T: (585) 698-1956 F: (585) 325-6005
bbishop at pathfinder-ea.com www.pathfinder-ea.com
[http://png-5.findicons.com/files/icons/977/rrze/720/globe.png]Carbon Fee and Dividend - simple, effective, and market-based.
Bill, there is only one run period. On the unmet hours, I am still building the model so I am not concerned with them right now. It?s just the run period I?m confused about.
[cid:image001.png at 01D1B028.DB3F8A90]
Thanks!
Vicki Rybl | Energy Engineer
RDK Engineers
P: (857) 221-5943
Hi Vicki,
The run period might be twice , hence double number of output data as per
weather file and twice enhanced unmet load hour it seems to be possible to
me.
I guessed this if the weather file is getting repeated and hence double
number of figures.
Mr. Bill seems correct to me. Just have a go through the model and repeat.
Thanks,
Sharad.Kumar|Engineer.
Green Horizon Consulting LLP.
Gurgaon.
India.
...........................................................
............................................................
..........................
Subject: [Equest-users] Simulation Output - 24 Month Period?
Hi All,
Has anyone experienced this before? I am running a simulation and the
output reports span 24 months instead of 12. Please see attached SS-G
report for an example. In addition, my unmet hours are twice what they
should be due to the fact that eQUEST is running the model over a 2-year
period. Any idea why this might be happening or suggestions for a fix?
Any insight is appreciated!
Thanks,
Vicki
Vicki Rybl | Energy Engineer
*RDK Engineers*
Seaport Center
70 Fargo Street, Suite 800
Boston, MA 02210
P: (857) 221-5943 | F: (617) 345-4226
vrybl at rdkengineers.com
---------- Forwarded message ----------