Seasonal Thermostat Set Point

3 posts / 0 new
Last post

How to change the seasonal thermostat set points for heating and cooling in
detailed data edit mode?

I forgot to change it in the wizard mode.

Please guide.

Syed M. Abidi, EIT, LEED AP

Syed Mohsin Abidi's picture
Joined: 2011-09-30
Reputation: 0

>From Building Description Detailed Edit Mode, click on the Component Tree tab in the bottom left next to Actions. Scroll down to the Annual schedules that you want to change and double click to open, (if you don't know which schedule you need to revise you can click on the Thermal Zone, in the Air-Side HVAC tab and locate the T-stat schedule in there). If you have all of your seasonal schedules in the annual schedule from the wizard, then you can click on the Day Schedules tab and adjust your set-points as needed for the given week schedule or "season". If it is not broken down into seasons then you will need to create a few more week and day schedules and add them to your annual schedule "weekly schedule assignments". You can right click on a day or week schedule to create a new one. You want to create a schedule type "temperature". After you have created all of the schedules you want, assign them to the proper season by inserting week in the annual schedules tab and choosing the proper week schedule. Make sure to assign the proper days and set-points in the week schedules tab.

Joe Fleming
E.I., LEED AP BD+C, BEMP

Fleming, Joe's picture
Offline
Joined: 2011-09-30
Reputation: 0

Thank you very much.

I got it now. You explained it quite well enough.

Syed

Syed Mohsin Abidi's picture
Joined: 2011-09-30
Reputation: 0