Hello,
I?m working on creating my zones in a model and when I move to detailed
mode, I don?t see any plenum zones. I have my HVAC system as split system
heat pump with one system per zone. How do I get the wizard to create
plenum zones?
Thanks,
*Mike Campbell E.I.T., LEED AP O+M
Michael:
On the Screen 2 Building Footprint, there is a "Floor Heights" area, broken up into "Flr to Flr" and "Flr to clg". The difference in your inputs will define the Plenum.
John R. Aulbach, PE, CEM
Is there a minimum difference required to have plenums defined? I have 1
foot difference but no plenums appear.
*Mike Campbell E.I.T., LEED AP O+M
*From:* John Aulbach [mailto:jra_sac at yahoo.com]
*Sent:* Tuesday, October 02, 2012 12:41 PM
*To:* Michael Campbell; equest-users at lists.onebuilding.org
*Subject:* Re: [Equest-users] No Plenum zones
Michael:
On the Screen 2 Building Footprint, there is a "Floor Heights" area, broken
up into "Flr to Flr" and "Flr to clg". The difference in your inputs will
define the Plenum.
John R. Aulbach, PE, CEM
------------------------------
*From:* Michael Campbell *To:* equest-users at lists.onebuilding.org
*Sent:* Tuesday, October 2, 2012 9:19 AM
*Subject:* [Equest-users] No Plenum zones
Hello,
I?m working on creating my zones in a model and when I move to detailed
mode, I don?t see any plenum zones. I have my HVAC system as split system
heat pump with one system per zone. How do I get the wizard to create
plenum zones?
Thanks,
*Mike Campbell E.I.T., LEED AP O+M
_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send a blank message to
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
I think anything more than a foot should register. Try 1.1
Vikram Sami, LEED AP BD+C
That worked ? thank you.
*Mike Campbell E.I.T., LEED AP O+M
*From:* Sami, Vikram [mailto:Vikram.Sami at perkinswill.com]
*Sent:* Thursday, October 04, 2012 2:37 PM
*To:* Michael Campbell; John Aulbach; equest-users at lists.onebuilding.org
*Subject:* RE: [Equest-users] No Plenum zones
I think anything more than a foot should register. Try 1.1
* *
*Vikram Sami*, LEED AP BD+C
*From:* equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] *On Behalf Of *Michael
Campbell
*Sent:* Tuesday, October 02, 2012 12:52 PM
*To:* John Aulbach; equest-users at lists.onebuilding.org
*Subject:* Re: [Equest-users] No Plenum zones
Is there a minimum difference required to have plenums defined? I have 1
foot difference but no plenums appear.
*Mike Campbell E.I.T., LEED AP O+M
*From:* John Aulbach [mailto:jra_sac at yahoo.com]
*Sent:* Tuesday, October 02, 2012 12:41 PM
*To:* Michael Campbell; equest-users at lists.onebuilding.org
*Subject:* Re: [Equest-users] No Plenum zones
Michael:
On the Screen 2 Building Footprint, there is a "Floor Heights" area, broken
up into "Flr to Flr" and "Flr to clg". The difference in your inputs will
define the Plenum.
John R. Aulbach, PE, CEM
------------------------------
*From:* Michael Campbell *To:* equest-users at lists.onebuilding.org
*Sent:* Tuesday, October 2, 2012 9:19 AM
*Subject:* [Equest-users] No Plenum zones
Hello,
I?m working on creating my zones in a model and when I move to detailed
mode, I don?t see any plenum zones. I have my HVAC system as split system
heat pump with one system per zone. How do I get the wizard to create
plenum zones?
Thanks,
*Mike Campbell E.I.T., LEED AP O+M
_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send a blank message to
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG