Dear All,
I'm currently conducting energy audit on my a recently constructed building
where energy results are extracted from building's energy meters on hourly
basis, I need to know if I can also extract total hourly energy use from my
eQuest energy model, and on which eQuest report can I find that?
Thanks a lot,
Kind Regards,
Hi Omar,
When you open the .SIM file using D2SimViewer, there is an Hourly Results button in the upper right corner of the window. This will open a .csv file in Excel with hourly values of total energy and for the energy end use categories shown in the BEPS/BEPU reports, as well as any custom hourly reports that you set up.
Regards,
~Bill
William Bishop, PE, BEMP, BEAP, CEM, LEED AP | Pathfinder Engineers & Architects LLP
Senior Energy Engineer
[cid:image007.jpg at 01D3A4B2.592D95D0] [cid:image008.jpg at 01D3A4B2.592D95D0]
134 South Fitzhugh Street Rochester, NY 14608
T: (585) 698-1956 F: (585) 325-6005
bbishop at pathfinder-ea.com www.pathfinder-ea.com
[http://png-5.findicons.com/files/icons/977/rrze/720/globe.png]Carbon Fee and Dividend - simple, effective, and market-based.
Additionally (and marginally quicker than loading up the SIM viewer), you can generate hourly CSV files via:
File --> Export --> Hourly Results?
[cid:image001.png at 01D3A4BF.3480A030]
[cid:image002.png at 01D3A4BF.3480A030]
Nick Caton, P.E., BEMP
Senior Energy Engineer
Regional Energy Engineering Manager
Energy and Sustainability Services
Schneider Electric
D 913.564.6361
M 785.410.3317
F 913.564.6380
E nicholas.caton at schneider-electric.com
15200 Santa Fe Trail Drive
Suite 204
Lenexa, KS 66219
United States
[cid:image003.png at 01D3A4BF.3480A030]