you could refer to some research paper in the international journals, such as Energy and Buildings, Energy Policy. They are available online in the Elsevier database.
Your question is hard to determine, because the cooling/heating load index differ largely from climate zone to zone.
I also think the building energy saving standard in Korea may have the recommended values.
Han Xing
Hello Everyone!
I'm looking for cooling/heating load criteria or recommendation in office buildings.
you could refer to some research paper in the international journals, such as Energy and Buildings, Energy Policy. They are available online in the Elsevier database.
Your question is hard to determine, because the cooling/heating load index differ largely from climate zone to zone.
I also think the building energy saving standard in Korea may have the recommended values.
Han Xing
Hello Everyone!
I'm looking for cooling/heating load criteria or recommendation in office buildings.
Where can i see related documents or reference?
Any information is appreciated.
Thank you for giving me your time.
Best Regards,
Min Seok Choi
Hello Everyone!
Recently, GreenBuildingStudio has been updated and GBS can export EnergyPlus(5.0) input File(.IDF)
So, I have used GreenbuildingStudio for Interoperability between RevitMEP2011 and EnergyPlus(5.0) using gbXML
but, I have some errors such as location of windows in EnergyPlus ( attached image)
Has anybody encountered this error?
Thank you for giving me your time.
Best Regards,
Min Seok Choi