Has anyone ever received a popup message like this:
"ERROR: Cannot open a required file
[File path][File name] - Baseline Design.CTL
It does not exist or is in use. Please correct this problem and retry."
File is attached. Thanks!
Dan
Daniel L. "Dan" Briller P.E., LEED AP BD+C
Energy/Environmental Engineer
10748 Deerwood Park Boulevard South
Jacksonville, FL 32256-0597
Phone: 800-741-2014 x2329 / Mobile: 571-314-4002
Dan.Briller at rsandh.com
Visit our website at www.rsandh.com
Connect with RS&H on Facebook
[cid:imagebdd48d.gif at 433293f9.980a427b]
Here's the .inp file too
Daniel L. "Dan" Briller P.E., LEED AP BD+C
Energy/Environmental Engineer
10748 Deerwood Park Boulevard South
Jacksonville, FL 32256-0597
Phone: 800-741-2014 x2329 / Mobile: 571-314-4002
Dan.Briller at rsandh.com
Visit our website at www.rsandh.com Twitter LinkedIn
Connect with RS&H on Facebook
Hi Dan,
I have the same error and noticed that it occurs in eQuest refrigeration 3.65 version. My model works fine without this error in 3.61 refrigeration version.
What happened is after opening eQuest for the first time, any change could be made. But after the first simulation, any attempt to change the inputs causes the error.
Have anyone had the same problem? Any suggestion to fix it?
Thanks,
Huy Tran
I have not had this error.
Have you tried 3.64? 3.65 seems to have a lot of these issues. One guess is that the file is either corrupted or still opened in the background.
You could try exiting out of equest, then open equest (with the desktop shortcut), then open the pd2 file through the file-->open menu (instead of double clicking on it). Sometimes opening the file this way seems to rectify odd errors.