Is there a way to tell which version of DOE eQUEST 3.65-7175 should be set to before opening a model file?
If I right-click the .pd2 I see the eQUEST software version number to use, but I don't see any indication of which DOE version to use (2.2 or 2.3). I usually just open it in whichever I currently have it set to, and if it gives errors I try opening it again with the other version set.
Thanks,
Phil Jordan
Hi Phil,
If you open the BDL file with a text editor, the DOE-2 version is shown on line 52.
Regards,
~Bill
William Bishop, PE, BEMP, BEAP, CEM, LEED AP
Senior Energy Engineer
T: (585) 698-1956 F: (585) 325-6005
bbishop at pathfinder-ea.com www.pathfinder-ea.com
134 South Fitzhugh Street
Rochester, NY 14608
We were looking at that yesterday coincidentally. In the .pd2 if you see the line:
DOE2Version = "Design Sizing"
... then it is a DOE-2.3 file.
DOE-2.2 files do not have the DOE2Version parameter written in the .pd2.
Regards,
Brian
Footprint
Brian Fountain
Associate
d 416 572 8501 m 416 562 6831