Dear All,
In my condenser water loop ie CW loop under basic
specificatiob tab there are two parameters design CHW temperature and loop
design delta T
Does these two parameters represent condenser water inlet temparature and
range of cooling tower which is (condenser inlet- condenser outlet)
respectively.?
Regards
Sambhav
Please find the attachement for the queary
Regards
Sambhav
Yeah ? the CHW temp is the design temp in the condenser loop. The delta T is the temp rise in the loop between return and supply.
Also ? if you ever wondered what a certain item means in eQUEST ? hover your mouse over it and it will give you some basic information. If you right click ? you can go to item specific information or general topic information too.
[cid:image001.png at 01CE823A.A5510EF0]
-Vikram
Vikram Sami
The functionality that Vikram mentions ? hovering the mouse over an input field to see basic information ? has to be enabled in the eQUEST initiation file.
[cid:image002.jpg at 01CE82D4.2D321E60]
You have to use a text editor to add the following line to the EQUEST.INI file:
ShowBDLComKeyInToolTip=1
This file is in the eQUEST data folder, the location of which is easily found by selecting Tools -> View File Locations -> View eQUEST Data Directory?
Additional directions are found in the RMI Model Manager Set Up and User?s Guide, courtesy of Ellen Franconi at RMI.
Regards,
Bill
William Bishop, PE, BEMP, BEAP, LEED AP