Hi Fakeha,

The fan schedule has to be like ON when the Fan is On and OFF when it is
Off.

It is the electrical supply input based Fan ON-OFF schedule when the Fan is
either On or Off.

You can reduce the cooling consumption by changing the cooling schedule to
higher values.

Suppose if the cooling temperature set-point is 70 then increase it to 72
degree Fahrenheit.

Thanks,

Sharad.Kumar

India.

...........................................................................................................................................................................................................................................................................

*From:* Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] *On
Behalf Of *Fakeha Sehar via Equest-users
*Sent:* Wednesday, June 28, 2017 8:54 PM
*To:* via Equest-users
*Subject:* Re: [Equest-users] change fan schedule type

[image: Inline image]

I want to change the fan schedule from on/off to fraction in order to
reduce the cooling consumption. But I am getting this error.

I want to change the fan schedule type from on/off flag type to fraction.
Ho can I do this.

Regards

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
______________________________________________________________________

_______________________________________________
Equest-users mailing list
Equest-users at lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org