Hello David, thanks for the tip on the process loads.
In the following table the results show that the KWh for the receptacle equipment is the same but we get -15.4029 in demand saving. (We triple check schedules and w/sf they are exactly the same)
Additionally we use the "Exterior Usage" and "Task Lighting" categories in the Electric Meter Direct loads ( for water pump, elevator, exterior lighting), using the same Schedule and Load (KW). As you can see the show saving in Demand.
What would we change In the *.SIM file to get the same results in the process load?
Thanks again for your help!
[cid:image001.png at 01D0FC43.357B3620]
[cid:image011.png at 01D0FC43.357B3620]
Ing. Eric Fischel J.
Tel.: (506) 2222-7529
Fax: (506) 2256-5608
From USA: 1-305-433-3668
Calle 30, Avenida 0 y 2. San Jos?, Costa Rica
[Logo CTS firma] [Description: LEEDAP_BDCbw] [cid:image014.jpg at 01D0FC43.357B3620]
Este correo puede contener informaci?n protegida por el secreto profesional. Si usted no es la persona a quien va dirigido, por favor tome en cuenta que su divulgaci?n, distribuci?n o reproducci?n es estrictamente prohibida. Cualquier persona que reciba este mensaje por error debe notificarlo inmediatamente al remitente v?a telef?nica o correo electr?nico y borrarlo permanentemente de su computador. Los comentarios plasmados en este correo son del remitente solamente y no reflejan necesariamente la posici?n de CTS S.A.
Por favor considere su responsabilidad con el medio ambiente antes de imprimir este correo electr?nico
----------------------------------------------------------------------------------------------------------------
This mail may contain information that is legally privileged, confidential or exempt from disclosure. If you are not the intended recipient, please note that any dissemination, distribution or copying of this message is strictly prohibited. Anyone who receives this message in error should notify the sender immediately by telephone or by e-mail and delete it permanently from their computer. The opinions above are those of the author and do not necessarily reflect the position of CTS S.A.
Please consider your environmental responsibility before printing this e-mail
I would look at your PS-E report to see when the peak loads are
occurring in your proposed and baseline models. I suspect that the
slight shift in when the peak demand is being set changes the breakdown
of that peak demand.
Hello Brian, that right there is a shift in the moment of the peak demand.
Does anyone know how to resolve this in the model or in any case how to deal with it in the LEED submittal for the reviewrs no to coment on it?
I have done lots o models and never came acorss with this issiue previsuly.
Best regards.
Ing. Eric Fischel J.
Tel.: (506) 2222-7529
Fax: (506) 2256-5608
From USA: 1-305-433-3668
Calle 30, Avenida 0 y 2. San Jos?, Costa Rica
[Logo CTS firma] [Description: LEEDAP_BDCbw] [cid:image015.jpg at 01D0FD20.98F0C0C0]
Este correo puede contener informaci?n protegida por el secreto profesional. Si usted no es la persona a quien va dirigido, por favor tome en cuenta que su divulgaci?n, distribuci?n o reproducci?n es estrictamente prohibida. Cualquier persona que reciba este mensaje por error debe notificarlo inmediatamente al remitente v?a telef?nica o correo electr?nico y borrarlo permanentemente de su computador. Los comentarios plasmados en este correo son del remitente solamente y no reflejan necesariamente la posici?n de CTS S.A.
Por favor considere su responsabilidad con el medio ambiente antes de imprimir este correo electr?nico
----------------------------------------------------------------------------------------------------------------
This mail may contain information that is legally privileged, confidential or exempt from disclosure. If you are not the intended recipient, please note that any dissemination, distribution or copying of this message is strictly prohibited. Anyone who receives this message in error should notify the sender immediately by telephone or by e-mail and delete it permanently from their computer. The opinions above are those of the author and do not necessarily reflect the position of CTS S.A.
Please consider your environmental responsibility before printing this e-mail