dear users ,
i am getting the below error
[image: Inline images 1]
and when i checked the mentioned location i found the below:
ECONO-LOW-LIMIT = *UNUSED*
Line 8246: Error Encountered:
"mechanical" = ZONE
************** ====
************************************************************
The name mechanical was already used on line 1292
Line 8246: Thermal Zone: mechanical
Line 8258: Error Encountered:
"rest room" = ZONE
************* ====
*************************************************************
The name rest room was already used on line 1371
Line 8258: Thermal Zone: rest room
Line 8270: Error Encountered:
"show room1" = ZONE
************** ====
************************************************************
The name show room1 was already used on line 1473
Line 8270: Thermal Zone: show room1
Line 8282: Error Encountered:
"show room2" = ZONE
************** ====
************************************************************
The name show room2 was already used on line 1590
Line 8282: Thermal Zone: show room2
Line 8294: Error Encountered:
"building entrance" = ZONE
********************* ====
*****************************************************
The name building entrance was already used on line 1713
Line 8294: Thermal Zone: building entrance
Line 8306: HVAC System: EL3 Sys1 (UVT) (G)
Line 8318: Warning Encountered:
..
ECONO-LOW-LIMIT = *UNUSED*
Line 8320: Thermal Zone: EL3 WNW Zone (f1.z1)
Line 8332: Thermal Zone: EL3 SW Zone (f1.z2)
Line 8344: Thermal Zone: EL3 SSE Zone (f1.z3)
Line 8356: Thermal Zone: EL3 NE Zone (f1.z4)
Line 8368: Thermal Zone: EL3 Cor Zone (f1.z5)
Line 8380: Thermal Zone: EL3 Cor Zone (f1.z6)
Line 8392: Thermal Zone: EL3 Cor Zone (f1.z7)
Line 8404: Thermal Zone: EL3 Cor Zone (f1.z8)
Line 8416: HVAC System: EL3 Sys1 (UVT) (M)
Line 8428: Warning Encountered:
could you please guide on how to trouble shoot the error or it will not
stop anything
regards
wafik
Hello Wafik,
It looks like you may have the same name for your spaces as you do for the zones. Although, not knowing what is listed on lines, 1292, 1371, 1473? I cannot be sure. I recommend adding the designator Spc for spaces, Zn for zones and Plnm for plenums, also I keep the eQUEST zone designation (G.NW1, B.SE2, etc) just to ensure I do not have duplication issues. You will need to fix these, since errors will stop your file from running, warnings should be investigated as well, but they will not stop your run.
Byron D. Burns, EIT, BEMP
Energy Engineer, Building Sciences Studio
H&A Architects & Engineers | www.ha-inc.com
d: (804) 420-1622 p: (804) 285-4171 f: (804) 217-8520